Sale!

Spyder Sentinel Tailored Fit Pant – Abyss (Regular Leg)

$399.90
$279.90

Save 30%

Description

The Spyder Sentinel Tailored Fit Pant brings all your needs to the table. Built with adjustable suspenders, waist and thigh ventilation zips, articulated knee construction, and reinforced scuff cuffs. Spyder’s 360° stretch EXO SHIELD fabrics are made with recycled polyester keeps you free to move with no restrictions. A 20k laminate and 40 grams of PrimaLoft® Black ECO Insulation means you’ll be set for any weather conditions that NZ can throw at you. A classic looking piece that will keep you going till the last lift powers down.

*Also available in a short length leg*


Features & Specs:

Materials: 100% Recycled Polyester
Waterproofing: 20K
Breathability: 20K
Insulation: 40g Primaloft Black ECO
Fit: Outerwear regular silhouette stay in normal size


EXO-Tech
EXO Technology encompasses Spyder’s two new proprietary fabric technologies, EXO Shield and EXO Thermo. EXO Shield is Spyder’s new outer face fabric and the inner waterproof membrane, whereas EXO Thermo is the interior lining. Both have the intended purpose to keep active winter enthusiasts as warm and dry as possible.
Primaloft®
The world’s best synthetic insulation alternative. PrimaLoft® insulation is soft, water resistant, warm without bulk, breathable, lightweight, and packable.


Additional Features:

  • 360º Stretch EXO SHIELD Recycled Polyester Plain Weave
  • 20k Laminate and PFCFree DWR
  • PrimaLoft® Black ECO insulation (40g)
  • YKK® zippers
  • Removable, adjustable suspenders
  • Adjustable waist construction and belt loops
  • Zippered hand pockets
  • Fully taped seams
  • Thigh ventilation system
  • Articulated knee construction
  • Reinforced scuff guard around bottom hem
  • Inner snow gaiters with gripper elastic to seal out snow around boot

Choose your items confidently by reading our buying guide.

Related Gear

We are a team of passionate skiers, our lives are entangled in a world of snow, mountains & ski paraphernalia. Take a look at how we can help you.

Get it right

buying guide

Useful guidelines to assist you when buying your gear.

Buying guide

Use our buying guide to help you purchase the perfect pair of ski pants.

The industry standard procedure for measuring a garment’s waterproofing is to place a column of water on a fabric and then increase the water level so more pressure is exerted. Once the water starts to penetrate the fabric, the water level is measured. This gives the fabric’s waterproof rating in mm e.g. 10,000mm. The higher the number, the higher the water proof capability of the item. 

Other areas of waterproofing concern are the seams. The stitching, done during manufacture, requires taping or sealing to be waterproof. In some cases all the garment’s stitching is taped while in others only critically placed stitching is taped (i.e. through the shoulders, hood and chest – high exposure areas).

Waterproof/breathable fabrics have pores large enough for water vapour to escape, but small enough to prevent liquid passing through. The garment must be able to breathe from the inside out, otherwise during activity perspiration moisture cannot escape. The garment becomes wet on the inside and the body’s temperature will drop because of it.

Oils, dirt, perspiration and other contaminates will eventually break down the waterproofness and breathability of any garment  and so, with time, they become permeable and fully breathable.

To make sure you remove moisture (perspiration) away from the body while remaining warm, use an appropriate layering system.

Base Layer

This is the most important layer of them all. This layer sits next to the body and has to work the hardest to remove moisture away from the skin and through the other layers. The base layer needs to fit closely to the body. Always choose base layers that have high wicking (removal of moisture away from the skin) properties, so it will regulate your body temperature. If you choose a fabric like cotton, this only stores moisture so will make you feel cold and damp eventually.

Mid Layer

The mid layer is there to add insulation as well as remove moisture from the base layer out to the outer layer. It is better to wear multiple mid layers than one thick one, as this promotes warmth by trapping warm air. Multiple light mid layers can be added or removed as required.  Good examples are light fleeces or slightly heavier weight thermals containing merino wool or silk.

Outer Shell

The outer layer consists of jackets and pants, which are there to protect from snow, wind and rain elements.  They must be waterproof as well as breathable to remove moisture away from the mid layer, thereby keeping you warmer and dryer.  Jackets and pants come in numerous different styles, cuts and fabrics.  Choose one that fits comfortably and meets your requirements of waterproofness and breathability.

Venting: Extra zips allow increased air flow when the body gets too warm. These are usually found in the upper leg area on pants and under the arm or across the chest, in jackets.

Hoods: Most jackets come with hoods that can either be folded away at the back of the neck or removed and placed in a pocket at the lower back. Modern hoods are shaped to be able to fit over any ski helmet.

Pockets: Pockets for storage are found everywgere, inside and out, on jackets and pants. Think about what you usually have on you and make sure there’s a place for it.

Powder Skirts: An elasticised skirt that stops snow and wind entering the jacket.

Cuffs: They are designed to keep the elements away from wrists.  They need to be adjustable to maximise their performance.

Reinforcements: In high use areas harder wearing fabric is used to slow down wear and tear.  This reinforced material is often found on shoulders where packs are used as well as lower inside leg area to prevent cuts from ski/snowboard edges.

Seamed/Taped sealed: Garments either fully or critically seam sealed to prevent snow and rain penetrating seamed areas. Crital means only areas deemed “critical” are taped whereas in a fully taped piece all seems are sealed.

Storm flaps: These flaps cover exposed zips with the purpose of stopping snow/wind and rain getting through.

Articulated Areas: Articulated areas make the garment much more comfortable to move in.

Belt Hoops: Fairly obvious – so a belt can be worn on pants, to help them stay in a secure place.

Can't find what your looking for?

Our technical team may be able to help you out.

Shop online

Select Zip as your payment method at checkout when you are ready to pay.

Log in or create an account

If you are not an existing Zip customer. There’s no paperwork and our ID and credit check is complete in minutes. You’ll need a valid NZ debit or credit card and NZ Drivers License.
Don’t have a Drivers license

Pay 25% up-front

and your goods are shipped straight away. Nice

Pay 25% for the next 3 fortnights

via an automated charge on your debit or credit card. You pay no fees or interest ever unless you miss a payment – read here what happens then
Find out more