Home / Pants / Planks Yeti Hunter Bib - Peacock
Planks Yeti Hunter Bib - Peacock

Planks Yeti Hunter Bib - Peacock

4x interest free payments of $89.98


The Planks Yeti Hunter Bib is packed full of features and will quickly become your best friend on those mega touring days. By using RIDEdry20 2-layer REPREVE fabric, Planks makes this bib one super waterproof and environmentally friendly, trusted pal in the back country. The full leg zips offer you ease of use and temperature regulation and the waterproof design gives you ultimate protection from the elements when you need it. Large dump pockets, reinforced hems, fully taped seams, the list goes on! The Yeti Hunter Bib really has it all.  

Gnomes Comments: Yeti Hunter bib just got even better with recycled products!

Features & Specs

  • 3 Layer RIDEdry20 Fabric 
  • 20,000mm / H2O Waterproof 
  • 20,000g / m2 Breathability 
  • Fully Seam Taped 
  • High Cut Bib 
  • Elasticated Crossover Shoulder Straps 
  • Low Profile Clips 
  • Oversized Mesh Chest Pocket 
  • Media Pouch 
  • Adjustable Velcro Waist with Belt Loops 
  • Compatible with Jacket-To-Pant Interface 
  • Full Length YKK VISLON Aquaguard Side Zips 
  • Hip Pockets with YKK Aquaguard Zips 
  • Large Front Dump Pockets 
  • Reinforced Hems with Ski Edge Protection Panels 
  • 3 Stage Adjustable Leg Opening 
  • Elasticated Boot Gaiters


Free shipping on orders over $99.
Shipping   Free NZ shipping on orders over $99

Ski Clothing Buying Guide

Use this step-by-step buying guide to help you pick out the right ski clothing.

Waterproofing & Breathability Waterproofing & Breathability

The industry standard for measuring a garment’s waterproofing is to place a column of water on a fabric and then increase the water level so more pressure is exerted.  Once the water starts to penetrate the fabric, the water level is measured. This gives the fabric’s waterproof rating in mm e.g. 10,000mm.  The higher the number, the higher the water proof capability of the item.  If 10,000mm is the water proof rating on a garment then water would not penetrate the fabric until over 10,000mm of rain had fallen within a 24hour period.

Other areas of waterproofing concern are the seams. The stitching, done during manufacturing, requires taping or sealing to become waterproof. In some cases all the garment’s stitching is taped, while in others only critically placed stitching is taped  i.e. through the shoulders, hood and chest (high exposure areas).

Waterproof/breathable fabrics have pores large enough for water vapour to escape, but small enough to prevent liquid passing through. The garment must be able to breathe from the inside out, otherwise during activity perspiration moisture cannot escape. The garment becomes wet on the inside and the body’s temperature will drop because of it.

Oils, dirt, perspiration, and other contaminates will eventually break down the waterproofing and breathability of any garment with time so they become permeable and fully breathable.


Layering Layering


To make sure you remove moisture (perspiration) away from the body while remaining warm, use an appropriate layering system.

Base Layer

Probably the most important layer of them all. This layer sits next to the body and has to work the hardest to remove moisture away from the skin and through the other layers.  The base layer needs to fit closely to the body. Always choose base layers that have high wicking (the removal of moisture away from the skin) properties,  so it will regulate your body temperature. If you choose a fabric like cotton, this only stores moisture so will make you feel cold and damp.

Mid Layer

The mid layer is there to add insulation as well as removing moisture from the base layer out to the outer layer.  It is better to wear multiple mid layers than one thick one, as this promotes warmth by trapping warm air. Multiple light mid layers can be added or removed as required.  Good examples are light fleeces or slightly heavier weight thermals containing merino wool or silk.

Outer Shell

The outer layer consists of jackets and pants, which are there to protect from snow, wind and rain elements.  They must be waterproof as well as breathable to remove moisture away from the mid layer, thereby keeping you warmer and dryer.  Jackets and pants come in numerous different styles, cuts and fabrics.  Choose one that fits comfortably and meets your requirements of waterproofness and breathability.





Extra zips allowing increased air flow when the body gets too warm. Usually in pants the vents are found inside or outside of the thighs.


Storage pockets are found in various places on the pants. Zippered pockets ensure you won't lose small items.


Reinforced areas around the lower leg ensure minimal wear and tear from dragging pants and catching them on ski edges.

Seamed/Taped sealed

Garments either fully or critically seam sealed to prevent snow and rain penetrating seamed areas.

Articulated Areas

Articulated knees and such make snowpants more comfortable to move in 


Bibs are a great option for keeping snow out and keeping pants up. Also look for braces, belt loops for belts, and powderskirts to keep pants up.


Here's something we prepared earlier

Sale Smith IO Mag XL Photochromic - Black
Smith IO Mag XL Photochromic - Black
Zip or 4 x payments of $93.98
Fischer Ranger 92 Ti (Ex-Demo)
Fischer Ranger 92 Ti (Ex-Demo)
Zip or 4 x payments of $224.98
Sale Picture Takashima Jacket - Petrol Blue
Picture Takashima Jacket - Petrol Blue
Zip or 4 x payments of $52.48
Sale Surfanic Missile Jacket - Dark Khaki
Surfanic Missile Jacket - Dark Khaki
Zip or 4 x payments of $49.98